On many lakes across the U.S. and Canada you will find docks which are installed in the Spring and removed in the Fall. Stationary docks which are supported on the bottom of the lake on poles generally come apart in sections that are fairly light and can be completed by hand. Sometimes large plastic wheels are permanently attached to the bottom of the dock poles. Often the fixed dock is light enough and rigid enough that a 30′ long section can be rolled right out of the lake and stored on the beach for the winter.
Floating docks typically use Inflatable Floating Platform and are either made entirely of polyethylene, or use a wood, aluminum, or composite deck that sits on top of the plastic floats. Floating docks weigh considerably more per foot than fixed docks. This additional weight can make it more challenging to produce a long rigid structure which is light enough to become carried out by hand. Frequently the longest floating dock sections are limited to around 10 feet. For long docks, the ten foot sections are linked to flexible connectors. These docks are generally removed if you take the sections apart and hand carrying them out of the water, one 10 foot section at a time. In case you have an effortless beach, you could possibly drag the fully assembled dock in the beach with the ATV or SUV. Sometimes individuals will use PVC pipe as rollers underneath the dock therefore the dock does not have to drag on the sand.
There are manufactures now making floating docks that may have a single rigid section that is up to 32 feet long. These docks are made from structural aluminum bolted together to form a 24″ tall truss running the length and width in the dock. Polyethylene floats are caged within the truss system and many common dock materials can be used as the deck. These truss type structures are light enough and strong enough to enable wheels to be mounted under the dock. In the event the dock is intended to be rolled up the beach, polyethylene wheels could be mounted similarly to those applied to stationary docks. In the event the shoreline is just too steep or it is really not easy to store the dock over the shore, a highway rated axle, wheels, and tires can be installed. The axle is galvanized as well as the bearings are generally protected having a military technology that was created to maintain positive air pressure within the bearing cavity for one year of Drop Stitch Fabric. A square or rectangular aluminum tube may be mounted under one end from the dock. This tube works as a receiver to get a 6′ long trailer tongue which will insert about 2′ then pin into position. You will find a trailer coupler on the extended end of the tongue that is made to get connected to a trailer hitch having a standard 2″ ball.
The dock can be towed over the water to some standard boat launch ramp where tongue is inserted into the receiver turning the dock into a floating trailer. A mild duty truck or SUV backs along the launch ramp till the coupler may be floated on the trailer ball. The coupler is locked on and also the truck pulls the dock out of the launch ramp the same as it was a boat over a trailer. The dock may be towed on the highway two miles or 200 miles. Temporary trailer lights may need to be installed depending on the distance and terrain traveled.
This new “Rolling Floating Dock” technologies have dramatically reduced the hassle of installing and removing floating docks. Especially benefited are the ones waterfront sites which are very steep and possess little if any beach. Floating Docks are available which are as much as 17′ wide but could be folded up within the launch ramp parking lot to merely 8.5′ wide so no special highway permits gbpman needed. Some docks may also add a large second deck. Big docks that are simple to install and take away can replace with the beach that numerous lake front owners wish that they had.
Some manufacturers can also license the dock as being a boat allowing it to be motored round the lake with the outboard and tiller handle. These docks become a safe, fun, and mobile platform for swimming and fishing. While technology is racing around us, it is actually nice to view that a number of that technology is giving us safe places to unwind on Inflatable Drop Stitch with the minds relaxed knowing that the task of closing up for the winter will be simple and quick.